Photo: Fireplace R228, Lueders Vigor, Aged Finish; Floor is Reclaimed and Re-edition Bourgogne Limestone
R228
FIREPLACES & MANTELS FP-R228
BASE DIMENSIONSOverall dimensions Opening dimensions |
59 1/8"h X 70"w X 30 1/4"d 47 3/4"h X 52 1/4"w |
|
FINISHES
Classic CL
smooth AND hand sanded
Chateau CH
lightly sand-blasted and aged by hand
Aged AD
HAND AGED AND STAINED to resemble AN antique
PRINCIPAL STONES
Calacatta Perla CCP
MARBLE
Calacatta Vagli CCV
MARBLE
Mont Blanc MTB
MARBLE
Narbonne NRB
LIMESTONE
Lueders Vigor TXL
LIMESTONE
Marseille MRS
LIMESTONE
Siena Blend SBT
LIMESTONE
Damas DMS
TRAVERTINE
Beauvair BVR
LIMESTONE
Cavaillon CVN
Travertine
Mezzo Taupe MZT
LIMESTONE
Ardu Gris ARG
LIMESTONE
Savoy Gris SVG
LIMESTONE
Picardie PCD
MARBLE
Vasio VSO
MARBLE
TECHNICAL ASSISTANCE
This is only intended to serve as a general guide. A knowledge of masonry is recommended and local codes may vary.
HANDLING
Our fireplaces are hand carved from natural stones (limestone, marble and travertine). They must be handled with care to avoid breakage or chipping during uncrating and installation. Due to the weight of some pieces, a mechanical lifting device may be needed.
INSTALLATION
1. Blocking must be put between the wall studs (2" X 6" or 2" X 8" studs are recommended) with mechanical anchors used to attach the stone to the blocking.
2. Use of an adhesive is required between the stone joints as well as the stone and the wall (thin set, mortar, epoxy, etc.)
SEALING & GROUTING
We recommend that a grout release be used on the stone prior to grouting. Always perform tests on a small inconspicuous area to determine the ease of application and the desired results. Sanded grouts are recommended (available in many colors from various manufacturers).